EPEVER Photo voltaic CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER Photo voltaic CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Photo voltaic Charge Controller is often a hugely economical photo voltaic controller designed for off-grid solar techniques. Based upon multiphase synchronous rectification technologies, it makes certain optimized Electricity conversion and program steadiness for an array of photovoltaic (PV) apps.
Vital Features from the EPEVER Tracer AN Collection Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Demand Controller technological know-how for superior solar Power harvesting. Important attributes contain:
Multiphase Synchronous Rectification (MSR) for improved Power conversion.
Superior MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for enhanced battery life.
Liquid crystal display Display screen with serious-time data checking.
Several Load Handle Modes such as manual and timer.
Complete Electronic Protections against overcharging, over-discharging, short circuits, and reverse polarity.
Move-by-Move Tutorial to Putting together the EPEVER Tracer AN Sequence Controller
1. Unboxing and Getting ready the Controller
Make sure all components are included: Tracer AN device, temperature sensor, interaction cables, and consumer guide.
Confirm the model range and voltage ratings match your photo voltaic panel and battery technical specs.
two. Mounting the Cost Controller
Choose a well-ventilated, dry location near the battery lender.
Safe the Tracer AN controller using the provided mounting brackets.
Manage right clearance for warmth dissipation.
3. Wiring the Photo voltaic Demand Controller
Caution: Usually follow good basic safety protocols and ensure the system is run off ahead of connecting elements.
Stage one: Connect the battery terminals to the demand controller (optimistic to good, negative to destructive).
Phase 2: Join the photo voltaic panel array towards the PV enter terminals.
Phase 3: Link the load terminals if utilizing a direct load relationship.
Move four: Double-check all connections for polarity and tightness.
4. Configuring the Controller Settings
Electrical power over the controller by connecting the battery initially.
Make use of the Liquid crystal display Exhibit to navigate the settings menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Handbook, timer, mild Command.
five. Monitoring and Facts Logging
The Tracer AN Sequence supports real-time checking using the MT50 distant meter.
Info can be logged by means of the RS485 communication port applying application like Photo voltaic Station Computer.
Distant monitoring is possible Together with the EPEVER WiFi module.
6. Troubleshooting Prevalent Issues
Situation 1: No Power Output
Test battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Challenge 2: About-Voltage Protection
Validate the solar array’s voltage score.
Regulate system parameters if needed.
Issue three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Advantages of More info the Tracer AN Collection with MSR Engineering
The multiphase synchronous rectification technological know-how assures:
Bigger Efficiency: Minimized Power losses through conversion.
Enhanced Dependability: Secure overall performance underneath variable loads.
For a longer time Battery Everyday living: Steady and precise charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is surely an exceptional option for optimizing solar energy generation and increasing battery daily life. By subsequent the above mentioned set up manual, end users can ensure optimum effectiveness and procedure longevity.